VMware Cloud Management and Automation exams

VMware Cloud Management and Automation exams

Q & A and more for VMware Cloud Management and Automation (CMA) certification exams numbers 2V0-620,2V0-602,2V0-731, VCAP7-CMA Design) Exam number 3V0-732, VCAP6-CMA Design Exam number 3V0-632, VCAP6-CMA Deploy Exam number 3V0-633.

VMware Cloud Management and Automation (CMA) certification is designed to recognize an aspirant’s skills to work with the vCloud Suite, including vRealize, as well as general and advanced cloud computing knowledge.

VMware was founded in 1998, became a subsidiary of EMC Corporation in 2004 and now falls under the Dell Technologies umbrella. The company is headquartered in Palo Alto, California.

VMware is slowly FINISHING Version 6 certifications as new exams for Version 7 are arisen. in this scenario, we should look into requirements for Version 7 certifications, but here first we look for information about Version 6 certifications. firstly, we get dipper into the VMware certification VMware Cloud Management and Automation. which is called VMware Cloud Management and Automation VCP-CMA.

VMware certification is spread in to 4 categories as per the skill levels.

  • VMware Certified Associate (VCA)
  • VMware Certified Professional (VCP)
  • VMware Certified Advanced Professional (VCAP)
  • VMware Certified Design Expert (VCDX)

so here for VMware Cloud Management and Automation, under the VCP category(VMware Certified Professional) the exam is for 2 categories VCP6-CMA and VCP7-CMA.

Under these 2 categories, there are following exams the aspirant has to pass out.

  1. vSphere 6 (2V0-620)
  2. vSphere 6.5( 2V0-602)
  3. VCP7  (2V0-731)

On the higher side – (VMware Certified Advanced Professional,) There are three VCAP certifications available in the Cloud Management and Automation category. they are as follows.

  1. VMware Certified Advanced Professional 7 (VCAP7-CMA Design) Exam number (3V0-732)
  2. VMware Certified Advanced Professional 6 (VCAP6-CMA Design) Exam number (3V0-632)
  3. VMware Certified Advanced Professional 6 (VCAP6-CMA Deploy) Exam number (3V0-633)

Let’s start looking into every exam numbers one by one.

vSphere 6 (2V0-620)

Note : VMware 2V0-620 and 2V0-621 exams retired in 2019. We are continuing to make this content available for those who wish to use it to study the foundational information it contains. 

vSphere 6 Foundations Exam 2V0-620 can be taken as part of official preparation steps toward your 6.5 or 7.0 certifications.

vSphere 6 Foundations Exam Official Cert Guide (Exam 2V0-620) focuses specifically on the objectives for the vSphere 6 Foundations (#2V0-620) Exam. Leading VMware consultant and trainer Bill Ferguson shares preparation hints and test-taking tips, helping you identify areas of weakness and improve both your conceptual knowledge and hands-on skills. Material is presented in a concise manner, focusing on increasing your understanding and retention of exam topics.

The companion website contains a powerful Pearson IT Certification Practice Test engine that enables you to focus on individual topic areas or take a complete, timed exam. The assessment engine tracks your performance and provides feedback on a module-by-module basis, laying out a complete assessment of your knowledge to help you focus your study where it is needed most.

Well regarded for its level of detail, assessment features, comprehensive design scenarios, and challenging review questions and exercises, this official study guide helps you master the concepts and techniques that will enable you to succeed on the exam the first time.

vSphere 6 Foundations Exam Official Cert Guide (Exam #2V0-620) is part of a recommended learning path from VMware that includes simulation and hands-on training from authorized VMware instructors and self-study products from VMware Press. To find out more about instructor-led training, e-learning, and hands-on instruction offered worldwide, please visit www.vmware.com/training.

The official study guide helps you master all the topics on the vSphere 6 Foundations Exam (2V0-620), including

·         Identifying vSphere architecture and solutions for a given use case

·         Installing and configuring vCenter Server and ESXi

·         Configuring vSphere networking, including vSS, vDS, and their features

·         Configuring vSphere storage

·         Deploying and administering virtual machines, VM clones, templates, and vApps

·         Establishing and maintaining availability and resource management features, including clusters, fault tolerance, and resource pools

·         Troubleshooting ESXi, vCenter Server, vCenter operations, VM operations, and basic misconfigurations

·         Monitoring a vSphere implementation, including ESXi, vCenter Server, and virtual machines

·         Installing, configuring, and managing vCenter Operations Manager


VMware vSphere 6 Foundations Exam (2V0-620) Practice Test

VMware Certified Professional 6 – Data Foundations Exam (2V0-620) Practice Test.

  • VMware vSphere 6 Foundations Exam (2V0-620) Practice Test Set 1 (75 Questions)75 questions
  • VMware vSphere 6 Foundations Exam (2V0-620) Practice Test Set 2 (75 Questions)75 questions
  • VMware vSphere 6 Foundations Exam (2V0-620) Practice Test Set 3 (75 Questions)75 questions
  • VMware vSphere 6 Foundations Exam (2V0-620) Practice Test Set 4 (75 Questions)75 questions

John Academy

vSphere 6.5( 2V0-602)

Are you ready to pass the VMware vSphere 6.5 Foundations 2V0-602 exam? Find out by testing yourself! This practice test includes 120 questions to help you confirm your mastery of the topics and providing you with the confidence you’ll need to take your vSphere 6.5 Foundations 2V0-602 exam.

The tests are timed in a manner similar to the actual certification test, so you’ll know when you’re taking more time than the official test allows. At the end of the test you’ll receive a personal breakdown of the questions you answered correctly and incorrectly, complete with explanation and links to external resources to help fill in any knowledge gaps!

In this practice test set, we’ll cover all the topics included in the VMware vSphere 6.5 Foundations 2V0-602 exam objectives, including:

· vSphere, ESXi, vCenter

· Administering VMs, and working with Clones and Templates

· vSphere Networking and Storage, including vSAN and VVOLs

· vSphere Configuration and Installation

· vSphere Clustering, DRS, HA, FT, EVC

· And much more!

Make sure you are ready to pass the VMware VMware vSphere 6.5 Foundations 2V0-602 exam by using these practice tests, the kind of questions you will see on the actual certification test.

ECourses4You

vSphere 6.5( 2V0-602) Q&A

QUESTION 1
A VMware vSphere 6.x Administrator sees the following output in esxtop:

What does the %RDY column represent?
A. CPU Cycle Wait Percentage
B. CPU Utilization
C. CPU Ready
D. Idle CPU Percentage


Correct Answer: C
Section: (none)
Explanation:
The percentage of time the world was ready to run.
A world in a run queue is waiting for the CPU scheduler to let it run on a PCPU. %RDY accounts for the percentage of this time. So, it is always smaller than 100%.


QUESTION 2
What three shares are available when configuring a Resource Pool? (Choose three.)
A. Custom
B. Low
C. Maximum
D. Normal
E. None


Correct Answer: ABD


QUESTION 3
A vSphere Administrator notices that a virtual machine is performing poorly, and upon investigation has
observed the following:

The guest operating system does not appear to be utilizing the resources that have been assigned to it.
The ESXi host has many other VMs present and utilization is high.
What is the first step in troubleshooting this problem?
A. Shut down the virtual machine and double the amount of vCPU and RAM assigned.
B. Shut down the virtual machine and set the number of vCPU as high as possible.
C. Migrate the virtual machine to an ESXi host with more resources available.
D. Configure the virtual machine with CPU and Memory limits.


Correct Answer: C


QUESTION 4
Which of the following are valid iSCSI adapter types for vSphere? (Choose three.)
A. Software
B. Independent Hardware
C. Converged Network Adapter
D. Dependent Hardware
E. iSCSI HBA


Correct Answer: ABD


QUESTION 5
Which two choices would make a Virtual Machine compatible when enabling Fault Tolerance? (Choose
two.)
A. e1000e virtual network adapter
B. 2 TB + VMDK
C. 4 Virtual CPUs (vCPU)
D. NIC passthrough


Correct Answer: AD


PRINCE2® 6th Edition: Foundation Certification with Official Manual and Exam

VCP7 2V0-731

Clear and Simple VMware vSphere 6.7 Professional VCP-DCV

Prepare for the VMware VCP-DCV 2019 2V0-21.19 exam. Learn all about vSphere version 6.7 and how to manage it.

Are you looking for VMware vSphere Training? Do you want to learn from an experienced trainer who makes complex concepts simple and easy to understand? Do you need to prepare for the VMware vSphere 2019 Datacenter Virtualization (DCV) exam?

VMware vSphere is everywhere. Non-virtualized data centers are a thing of the past, and in order to stay relevant you must understand vSphere. This course builds off my “Clear and Simple vSphere Foundations” videos, and gives you a deeper understanding of vSphere.

Topics covered in this course include

Networking

  • Configure vSphere Standard and Distributed Switches
  • NIC Teaming and failover
  • Port Mirroring
  • Network IO Control
  • Traffic Shaping
  • Private VLANs
  • TCP/IP Stacks
  • NetFlow

Storage

  • VMFS and NFS
  • iSCSI
  • FC and FCoE
  • vSAN
  • VVOLs
  • Storage Multipathing and failover

Security

  • Single Sign-On
  • Hardening VMs and Hosts
  • Encrypted vMotion
  • Roles and Permissions

Updates and Upgrades

  • Update Manager
  • Upgrade VMware Tool and VM Hardware
  • Upgrade ESXi
  • Upgrade vCenter
  • Migrate vCenter Server for Windows to the vCenter Server Appliance

Deploying Virtual Machines and Hosts

  • Templates and Cloning
  • Auto Deploy and Host Profiles
  • Content Libraries
  • vCenter Converter
  • Working with VMX Files

Resource Management

  • Configuring DRS Clusters
  • DRS Affinity Rules, Overrides, and advanced settings
  • Shares, Limits, and Reservations
  • Resource Pools

Troubleshooting

  • Restart ESXi Management Agents
  • Collect Diagnostic Data
  • Generate Log Bundles

Backup and Recovery

  • vSphere Data Protection
  • vSphere Replication
  • High Availability (HA)
  • Virtual Machine Component Protection (VMCP)

VCP7 2V0-731 Q&A

QUESTION 1
In the vRealize Orchestrator client, where can an administrator view the workflow and repair validation
errors?
A. Run tab in the workflow editor
B. Validation tab in the workflow editor
C. Workflow tab in the workflow editor
D. Schema tab in the workflow editor


Correct Answer: D


QUESTION 2
A user receives a submission page with a red exclamation when attempting to submit a request.
Which option best explains this behavior?
A. The approver has NOT approved the request.
B. The user exceeded the allowable resources for that request.
C. Actions have NOT been assigned to that item.
D. The user is NOT entitled to that resource.


Correct Answer: B


Google IT Support Professional Certificate by Grow with Google (550x480)

QUESTION 3
Which two items are required for an administrator to successfully create a vSphere reservation? (Choose
two.)
A. A reservation policy
B. A business group
C. A compute resource
D. A network profile


Correct Answer: BC


QUESTION 4
What specific action must an administrator take before deleting an approval policy?
A. Deprecate the policy
B. Unpublish the policy
C. Deactivate the policy
D. Decommission the policy


Correct Answer: C


QUESTION 5
A compute resource in a fabric group has 100 GB of memory. The following memory reservations were
created from the compute resource:
Business Group A: 60 GB
Business Group B: 60 GB
What would be the expected result of this configuration?
A. Both business groups will compete for memory resources.
B. Both business groups will be guaranteed 50 GB of memory
C. Business group A will be guaranteed 60 GB of memory
D. The configuration will result in an error.


Correct Answer: A


QUESTION 6
Which two options are supported for the laaS database in a minimal deployment of vRealize Automation?
(Choose two.)
A. Microsoft SQL Server installed on the IaaS server
B. Microsoft SQL Server installed on an external server
C. PostgreSQL Server installed on an external server
D. PostgreSQL Server installed on an IaaS server.


Correct Answer: AB


QUESTION 7
Which two statements are true when configuring redundant, high availability vRealize Automation proxy
agents for one vCenter Endpoint? (Choose two.)
A. Agent names must be identical
B. Agent configurations must include different vSphere credentials.
C. Agent configurations must be identical.
D. Agent named must have the same root with the extension 01 and 02.


Correct Answer: AC


QUESTION 8
The vRealize Orchestrator Server Configuration for XaaS activity needs to be pointed to an external server
for all current and future tenants. The default server configuration is currently in use.
Which two options accomplish this task? (Choose two.)
A. Log into the default tenant as a system administrator.
B. Configure the external vRO connection under the Infrastructure tab.
C. Log into the default tenant as a tenant administrator.
D. Configure the external vRO connection under the Administration tab.


Correct Answer: AD


QUESTION 9
An external vRealize Orchestrator is being configured to automate items in vRealize Automation. The plug-in
is installed, but an administrator is still unable to automate items in vRA.
Which two items below will enable vRO to automate items in vRA, including aspects of laaS? (Choose two.)
A. Add an IaaS host to vRO using the workflow.
B. Edit the plug-in interface to add the vRA host information.
C. Add a vRO endpoint in vRA.
D. Add a vRA host to vRO using the workflow.


Correct Answer: AD


QUESTION 10
What is required to allow a XaaS blueprint to provision objects that can be managed from the Items tab?
A. Resource action has been created.
B. A machine blueprint has been created.
C. A software component has been created.
D. A custom resource has been created.


Correct Answer: D


Full skill ahead. Online video courses from $9.99

Now let us see the higher side VMware professional certifications

VMware Certified Advanced Professional 7 (VCAP7-CMA Design) Exam number (3V0-732)

3V0-732 Q &A

QUESTION 1
A network team has decided to utilize NSX to enable micro-segmentation in its environment. Several networks have been created to support a three-tiered application network. An architect has been asked to
incorporate this into the vRealize Automation environment and consume these networks on-demand.
What are two things the architect needs to take into consideration in this scenario? (Choose two.)
A. usable Subnet Mask in the network profiles
B. routed network profiles assigned to virtual machine port groups in the reservation
C. external network profile for each application tier
D. routed network profile for each application tier.


Correct Answer: CD


QUESTION 2
An architect is tasked with designing a backup strategy for vRealize Orchestrator as part of an upcoming production rollout of a Cloud Management Platform.
Which are two valid backup design recommendations? (Choose two.)


A. If vRealize Orchestration is embedded within the vRealize Automation appliance, perform its backup
along with Manager Services for vRealize Automation.
B. Perform a backup of vRealize Orchestrator virtual machines in the order of the startup priority.
C. If vRealize Orchestrator is a standalone component, perform its backup before backing up vRealize
Automation components in no particular order.
D. Perform file-level backup of the Orchestrator database only after a successful full virtual machine backup.


Correct Answer: CD


QUESTION 3
The architect for a vRealize Automation project has a customer who wants the ability to do ‘Backup as a
Service’ capabilities through day two operations. This is to allow end users to do on-demand backup and
restores of their vRealize Automation workload machines without the need to open a ticket with Support.
To which two infrastructure qualities does this technical requirement map? (Choose two.)
A. Recoverability
B. Security
C. Manageability
D. Availability
E. Performance


Correct Answer: AD


QUESTION 4
Which two-factor authentication mechanism is supported by vRealize Automation?
A. Mobile SSO (Secure Sign-On) authentication
B. AirWatch Cloud Connector authentication
C. Certificate-based authentication
D. RADIUS (Remote Authentication Dial-In User Service) authentication.


Correct Answer: D


QUESTION 5
The tenant administrator for a company’s vRealize Automation deployment is asked to create a profile for a
user that should be able to assemble the blueprints that define catalog items for consumers to request from
the service catalog.
Which tenant role should this user be granted?
A. Fabric administrator
B. Catalog architect
C. Blueprint administrator
D. Application architect


Correct Answer: D


Pearson Education (InformIT)

VMware Certified Advanced Professional 6 (VCAP6-CMA Design) Exam number (3V0-632)

This exam tests your ability to develop a vRealize Automation 6.x conceptual design given a set of customer requirements, determine the functional requirements needed to create a logical design, and architect a physical design using these elements.

The Q & A and other useful exam materials will come soon for this exam….


VMware Certified Advanced Professional 6 (VCAP6-CMA Deploy) Exam number (3V0-633 )

The Q & A and other useful exam materials will come soon for this exam….

John Academy